Orbita Sparta Yourself Power Supply

The SPARTA winder module makes it easy for fabricators to design and build a habit winder scheme for a closet, safe or any particular storage area. They are wholly self contained units and operate on low voltage, readily available alkaline batteries. With battery life measured in years, not months, there is no need for installing any high voltage electrical house wiring. Installation is quick and easy. Using a panel with a thickness of 3/8″(10mm), all that is necessitated is a bored 3-3/8″ diameter hole for each module. The module is inserted from the rear of the panel and held in place with 4 – 3/8″ (10mm) wood or sheet metal screws. Panels may be of heavier construction if desired. Simply machine a “pocket” which is 4″ x 4″ for each unit leaving a 3/8″ wall thickness. # Orbita Sparta Do-It-Yourself Module is supplied totally assembled. All that is required is to connect the two 48″ lead wires (red and black color) of each module to a 3 VDC battery holder. # The oscillating winding action of the SPARTA winder is totally self-regulating and there is perfectly no probability of damaging an highpriced watch by over-winding. # A semi-circular rotor, attached to the back of the mounting cup, is the “heart” of the patented ROTORWIND system. # Orbita Sparta Do-It-Yourself Module Panels may be mounted vertically or tilted back 5 to 10 for fail-safe operation in the event that mounting cups are not positioned correctly. # Orbita Sparta Do-It-Yourself Modules may be mounted on a 4″ x 4″ grid altho the 6″ grid shown on the initial photo under provides adequate space for battery holders. # Sparta Do-It-Yourself Module Operation is almost silent and there is perfectly no maintenance required. # Orbita Sparta Do-It-Yourself Modules are guaranteed for 2 years operation but are designed to effortlessly provide 8-10 years of life without attention.